Halloween Apothecary Decorations

I have been so busy working on my costume and crafts I am just now getting to post my work. Start to finish on the projects instead of a few steps at a time.

I found some super cute D. I. Y. Apothecary bottles on Pinterest, I tried making them myself and I think I did ok. Below are how I made them with photos.

A7A4079B-715A-40F7-84EB-CA8436C3F44C.png

This is the photo that I found and were my inspiration bottles. I knew if they turned out half as good as these they would look great in the kitchen.

First step was collecting bottles, this I did for about 6 months in advance of actually doing the project. Another quick way is to hit up your friends for two to three weeks prior to project day.

E45EC102-0BFC-4D05-9CFB-EFBCF3D50E65.jpeg

Step Two- The removal of labels. This part is the least fun. I tried several different methods filling the sink with hot soapy water and letting the labels get soggy worked well. I then took a fingernail scrub brush I use after I gardening and scrubbed the softened labels.

E5179F38-19EE-473B-91B1-BF7A71BD7FB2.jpeg

F3E8A828-A488-4AAE-9AC6-96FB9606B90F.jpeg

The bottles were still sticky where the labels were, but I was hoping it would help my hot glue words stick and stay in place as I was placing them on the bottles.

I have worked with hot glue before when I made some snow flakes for a costume and I used the same technique with this project. Hot glue is messy and is stringy. So I used wax paper and put my design on the wax paper, let it dry and then cut it out with small sharp scissors.  This way its not stringy and if there is a bit to much in one spot or another I trim it to how I want it.

0DE41C6E-F4F0-4A0C-8C70-AECDBB2CC8E8.jpeg

Next they go on the bottles. I used the hot glue gun to put tiny dabs of glue on the back of the cut out words to permanently adhere them to the bottles.

5A5DE037-B3FA-4760-9FFB-2C59CD666521.jpeg

I also purchased a small bag of 12 plastic eyeballs for a dollar and hot glued them to the top of the lids. I had wanted to find some small plastic animals for on the lids but I did not find any that I liked enough, or for a reasonable price.

You can see they are really starting to come together, the last and I think the most fun is painting. Just a quick tip, you might want to plan a few other tasks for in between drying times. For a well mottled look it takes 3-4 coats of different colored paint. Each layer of paint needs to dry before the next layer is placed on top of the last.

I have found that when layering colors going from darkest to lightest or lightest to darkest works the best. I went from dark to light because I wanted to make sure all of the white parts of the bottles were covered.

Charcoal and green mixed for the base coat, the whole bottle and lid.

6795DF3F-E73B-490F-AC92-58A9D3C9011C.jpeg

When the base coat is complete on all of the bottles ( dark green) you just add paint to your base color. This saves paint and time and you know that the colors will work well together because your next color created is a variation  the current base color (dark green).

I added a small amount of metallic gold to my dark green, to produce a slightly lighter and shimmering green.  This coat was not a complete covering coat like the dark green was. I splotched it on.

The next layer of paint I added even more metallic gold paint.

This makes three layers of color. I then used the gold paint with just a very little bit of my mixed lightest color for a slightly bronze or dirty gold look to paint on just the words to help them stand out.  Also on our blood bottle we used red paint to make it look like blood.

Finished products were not too shabby.

780B14A6-6677-4FA8-A448-8D50520BFD1E.jpeg

We have gotten a great deal of positive feedback from our friends and family. I think this project was fun. I think it would be a great October or late September art project for kids home schooled or not. It teaches color mixing skills as well as patience and dexterity. Cutting out the hot glue words and painting the gold on the words helps with fine motor skills and the development of them and learning how to control the tools used in this project.

RickabaughReviews Approves!

 

 

 

Weekend Warrior!

Last weekend in August! Got to make the most of it!

Last Weekend in August-Work hard, play hard, sleep hard too.  Had so many gardening tasks planned for this weekend but only got a few done- due to my finger cutting episode. That is okay, we worked on a million other things this weekend. Plus we spent a little sweetheart time date night out to a movie.

Yesterday bright and early I started cleaning. Bathrooms, floors, laundry and ceiling fans. Then we did some gardening where my finger got cut, but it is healing great.  I soak it in warm soapy water every morning and then wear a bandage with triple antibiotic ointment, changing the bandage 4 times a day and letting the skin dry out a bit in between.  I wait until my skin is not so wrinkly from being wrapped up with moisture before I wrap it up again. When we go out I put a small finger splint we have on hand over my finger for extra protection. it is still just slightly sensitive.

While soaking my fingers in soapy water I set up a stepping stone to start painting. Looking good.

DD78A029-3B91-44B8-B8BD-149BEC5E0E14.jpeg

I got around to water proofing my concrete leafs as well as a rock I painted months ago. The tops of these are done. I will get the bottom s of them tomorrow.

70726BA9-F06B-4E67-BFBE-051F467381C8.jpeg

I have the border on the baby boy blanket completed and am working on tying in the ends, so almost complete blanket! In plenty of time before my friends baby boy is here.

274A668B-8C22-4807-9868-F835BFC726D4.jpeg

I have successfully designed, printed, addressed and yes put in the mail box. Invitations to a great Aunt”s 90th birthday party.

The husband and I both sanded for an hour each on my China cabinet makeover.  The husband used the Dremel on the top edges where its a bit fancy and too tricky and small for the Black and Decker Mouse hand sander that I prefer to use.  It doesn’t look much different then my last update on my china cabinet makeover but it is coming along.  I did some sanding on the bottom of the shelves and I used the 220 grit on the one outside and my goodness that is so smooth.

0A9EA697-9ABA-40C4-B342-A635045C7EF1.jpeg

5E13CAF6-246C-4E38-8FB3-BF07209B92E7.jpeg

We went material shopping for my Halloween costume updates are in my previous post Hela of a costume. Made my cutie pie niece a card for her birthday. 8 is great! Also in the mail.

We also finally started working on our new bar.  We left the old bar behind when we sold the old house, it really was beautiful and it went great with the dining room.  It was our first bar building experience as a couple and we have a few things we are very excited about doing differently.  We got some stain, and some frame! 2x3x8 boards to start building the frame.

Busy! To bed at midnight and Up at 5am. Do it all over again tomorrow.

Garden Stepping Stones

5747FD88-7FB8-4288-9B8A-DDCFD2ED130D67B95B52-FE7D-4F69-9D71-385708B23572 In the first photo you can see the first leaf casting that I attempted. I used the back side of a hosta leaf the veins on the back sides of leaves are usually thicker which gives good grooves or definition to the concrete. Advised cure time of concrete depending on the type of concrete differs. My bag stated at least 30 days before waterproofing or staining. So my hosta leaf sat in the shed for 30 days to cure. It has been painted in the second photo. The waterproof label states that the waterproof material added to the concrete should be allowed to cure for 48 hours before submitting to natural weather. Tonight I will waterproof the back and reveal my banana leaf steps.

9A684996-C81A-41C9-BFD1-57F2DF162B51

This is the concrete waterproofing product that I am using.  About a week ago I water proofed the top of the painted concrete leaf, but I did not photograph the process, I was wearing gloves and had never done it before and was not sure how it was going to turn out.  Today I finally carved out 10 minutes of my evening and waterproofed the back of the leaf, and got photos of the process.

AD808540-9B69-4CB4-953B-183868EA8600

I shook the gallon container a few times to make sure its mixed well and to make sure there was still liquid in the container.  I poured it directly onto the leaf back, the liquid is very thin and has a milky look to it.  It soaks into the concrete quickly, it is not very easy to spread.  I ended up pouring the liquid on in several different places on the leaf back to make sure I got all the back and sides completely covered. Within minutes the leaf back looked exactly as before. But suggested cure time for waterproofing with this product is 48 hours.  So once again, we play the waiting game.

663000CA-8D08-4FA7-A255-6DEC1AB3917D

This photo was taken about 3 minutes after I had applied the water proofing material to the entire back side of the hosta concrete leaf.

059091E6-DBEF-4625-AFDE-BE8AE24160E0.jpeg

Stepping stone was put in the ground this weekend! So cute! So little!

My husband and I finished painting our grape leaves tonight.

230E3685-9ADF-4C25-A769-B284E0E8C703.jpeg

My husbands’ leaf is on the left and mine is on the right.  We figured out this evening that all of the super cool shiney leaf castings we have seen have probably been using metallic paints. Which is what I have used this evening.